To Resolve a Card Jam in a DTC1250e follow these following steps:
Card jams can be frustrating, but they’re often easily resolved. Here’s a step-by-step guide:
- Turn Off and Unplug: Ensure the printer is turned off and unplugged from the power source.
- Open the Cover: Carefully open the top cover or access panel to expose the card path.
- Locate the Jam: Look for the jammed card. It might be stuck in the card path, rollers, or near the printhead.
- Remove the Card: Carefully remove the jammed card. Avoid pulling it forcefully, as this could damage the card or the printer.
- Clear Obstructions: Check for any other debris or obstructions in the card path and remove them.
- Inspect Rollers: Examine the rollers for any dirt or paper fibers. If necessary, clean them gently with a soft cloth.
- Close the Cover: Securely close the cover.
- Power On and Test: Plug the printer back in, turn it on, and try feeding a card again.
- To Resolve a Card Jam in a DTC1250e also regularly use cleaning kit.
If the problem persists, try these additional steps:
- Check the Ribbon: Ensure the ribbon is properly installed and not causing a jam.
- Inspect the Printhead: Look for any foreign objects or debris that might be affecting the printhead.
- Update Firmware: Check for any available firmware updates for your DTC1250e printer.
- How to fix card jam FARGO HDP6600 Card Printer
